Sådan bruger du enurinanalysator
Urinanalysatorer er af stor værdi ved diagnosticering af forskellige sygdomme i urinvejene, fordøjelsessystemet, kardiovaskulære og endokrine systemer, LX-observation, prognoseevaluering og befolkningssundhedspleje. Urinanalysatoren bruges til urindetektion, og detektionsresultaterne har præstationer som nøjagtighed, detektionshastighed og anti-krydsinfektion.
Hvordan man betjener enurinanalysator
1. Start:
Tænd for hovedstrømmen til urinanalysatoren, betjen displayet, printerens strøm, og indtast brugernavnet og adgangskoden i dialogboksen.
2. Forberedelse før analyse:
①Check whether the distilled water and deionized water are sufficient, whether the waste liquid pipeline is blocked, whether the waste liquid bucket is emptied, check whether the distilled water and deionized water are sufficient, whether the waste liquid pipeline is blocked, and whether the waste liquid bucket is emptied;
②Check whether the high-concentration cleaning tank has enough high-concentration cleaning solution;
③Check the sample needle, check reagent needle, check sample stirring needle and reagent stirring rod, and confirm that there is no dirt or bending. If dirty, clean the sample needle. If bent, replace the sample needle. If there is dirt, clean the stirring rod;
④ Calibration, preparation of quality control products.
3. Start detektion:
①Calibration: Place the kit calibrators for blood glucose, urea, creatinine, uric acid, and protein in the corresponding positions, click to start calibration;
②Quality control test: place it in the corresponding position and click to start the test, all items are under control for sample test;
③ The specimen is checked, and the number is placed in the corresponding detection position;
④Click the application item to apply for inspection, and click the start button to perform the inspection;
⑤Enter information in the system;
⑥ Review, print and issue reports.
4. Nedlukning:
When the urine analyzer is in the "idle" state, you can click Shut Down and follow the prompts to select "Exit" to perform the shutdown operation;